EverFocus GIGABIT MANAGED ETHERNET SWITCH ESM316T002R - Manual (Page 53)

53
Port Isolation
The feature provides port-based security and isolation of local ports. The switch isolates port traffic by specifying
those ports to which it can forward or receive traffic.
Web Smart switch interface
To configure Port Isolation settings:
1. Click Security, Port Isolation.
2. Select one or more ports to configure.
3. Select one or more ports to which traffic can be forwarded and received.
4. Click Apply.
Figure 40: Port Isolation
Hint§
The following parameters are shown on the Port Isolation page.
■ Port — Select port and trunk interfaces. (Port Range: 1-18)
■ Port Isolation List — Select port and trunk interfaces to which traffic can be forwarded and received. (Port
Range: 1-18; Default: All ports and trunks)