Wolf 36 Inch Pro-Style Gas Rangetop Installation Guide - Manual (Page 7)

wolfappliance.com | 7
Troubleshooting
Before contacting Wolf Factory Certified Service, visit
subzero-wolf.com/assistance or use these helpful tips to
prevent the need for a service visit.
Rangetop does not operate.
1 Verify power is on.
2 Verify electrical power is supplied to the rangetop and
the home circuit breaker is on.
3 Turn off the unit at the circuit breaker or electrical
supply source for 30 seconds, then turn on power to
the unit.
4 Verify the gas supply shut-off valve is in the open
position.
5 Contact Wolf Factory Certified Service. Do not attempt
to repair the rangetop. Wolf is not responsible for ser-
vice required to correct a faulty installation.
Burner pan is uneven.
1 Verify the product is sitting on a level platform and
pushed all the way back into the opening.
2 Confirm the burner grate is sitting level on the burner
pan.
3 Contact Wolf Factory Certified Service.
Gas Supply Connection
All connections to the gas piping must be wrench-tight-
ened. Do not overtighten or allow pipes to turn when
tightening.
If a flexible metal connector is used, verify it is not kinked,
then attach the gas supply line to the regulator on the
rangetop. Open the valve and check for leaks by placing
a liquid detergent solution onto all gas connections.
Bubbles around the connections indicate a gas leak.
If a leak appears, close the shut-off valve and adjust the
connections.
Sub-Zero, Sub-Zero & Design, Sub-Zero & Snowflake Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, Wolf, Wolf &
Design, Wolf Gourmet, W & Design, red colored knobs, Cove, and Cove & Design are registered trademarks and service marks of Sub-Zero Group, Inc. and its subsidiaries.
All other trademarks are property of their respective owners in the United States and other countries.
Installation