Wolf 36 Inch Pro-Style Gas Rangetop Installation Guide - Manual (Page 6)

6 | Wolf Customer Care 800.222.7820
Installation
Preparation
Prepare the finished opening for the rangetop according to
dimensions shown in the illustration on the previous page.
The platform must include a cutout at the right rear for
the electrical and gas supply connections. It must be level
to ensure the cooking surface is level. Refer to the chart
below for the minimum base support.
INSTALLATION REQUIREMENTS
PLATFORM
Thickness 3/4" (19)
BASE SUPPORT MIN
30" Rangetop 200 lb (91 kg)
36" Rangetop 250 lb (113 kg)
48" Rangetop 300 lb (136 kg)
Placement
Use an appliance dolly to move the unit near the opening.
Remove and recycle packing materials.
If a riser has been specified, refer to the installation instruc-
tions packaged with the riser. The riser must be installed
before the rangetop is installed.
Place the unit into the opening. Connect the gas and elec-
trical supply. The connections may need to be made prior
to final placement.
For wok models, install the wok plate notch toward the
front of the unit. Refer to the illustration below.
NOTCH
Wok plate notch