Wolf 36 Inch Cooktop Installation Guide - Manual (Page 13)

wolfappliance.com | 13
Gas Supply Connection
All connections to the gas piping must be wrench-tight-
ened. Do not overtighten or allow pipes to turn when
tightening.
If a flexible metal connector is used, verify it is not kinked,
then attach the gas supply line to the regulator on the
cooktop. Open the valve and check for leaks by plac-
ing a liquid detergent solution onto all gas connections.
Bubbles around the connections indicate a gas leak. If a
leak appears, close the shut-off valve and adjust the con-
nections.
Burner Grates
24" COOKTOP
For the 24" cooktop, the grates must be positioned cor-
rectly to ensure proper burner performance. The grates
have an indicator on the bottom of the front edge. Position
the grates with the indicator toward the front of the cook-
top. Refer to the illustration below.
FRONT
Grate placement (24" cooktop)
Installation