beautypg.com

Maytag 36 Inch Smoothtop Electric Cooktop Installation Instructions User Manual

Page 7

background image

7

3-Wire Cable from Power Supply to 4-Wire Cable

from Cooktop

IMPORTANT:

Use the 3-wire cable from power supply where

local codes permit connecting the frame-ground conductor to

the neutral (white) junction box wire:

1.

Disconnect power.

2.

Remove junction box cover, if present.

3.

Connect the flexible, cable conduit from the cooktop to the

junction box using UL listed or CSA approved conduit

connector.

4.

Tighten screws on conduit connector if present.

5.

Connect the two black wires together using the UL listed wire

connectors.

6.

Connect the two red wires together using the UL listed wire

connectors.

7.

Connect the green or bare and white cooktop cable wires to the

white (neutral) wire in the junction box using the UL listed

wire connectors.

8.

Connect the green or bare ground wire from the cooktop cable

to the green or bare ground wire (in the junction box) using

the UL listed wire connectors.

9.

Install junction box cover.

10.

Reconnect power.

4-Wire Cable from Power Supply to 3-Wire Cable

from Cooktop

IMPORTANT:

Use the 4-wire cable from power supply where

local codes do not permit connecting the frame-ground

conductor to the neutral (white) junction box wire:

1.

Disconnect power.

2.

Remove junction box cover, if present.

3.

Connect the flexible cable conduit from the cooktop to the

junction box using a UL listed or CSA approved conduit

connector.

4.

Tighten screws on conduit connector if present.

5.

Connect the two black wires together using the UL listed wire

connectors.

6.

Connect the two red wires together using the UL listed wire

connectors.

7.

Connect the green or bare ground wire from the cooktop cable

to the green or bare ground wire (in the junction box) using

the UL listed wire connectors.

8.

Put a UL listed wire connector on the end of the white wire.

NOTE:

Do not connect the bare ground wire to the neutral

(white) wire in the junction box.

9.

Install junction box cover.

10.

Reconnect power.

B

C

D

E

F

H

A

G

I

A. 3-wire cable from power supply
B. Red wires
C. White and green or bare ground

wires (from cooktop)

D. 4-wire cable from cooktop
E. Junction box

F. White wire (from power supply)
G. UL listed wire connector
H. Black wires
I. UL listed or CSA approved

conduit connector

B

C

D

E

F

H

A

G

I

A. 4-wire cable from power supply
B. Red wires
C. Green or bare ground wire

(from cooktop)

D. 3-wire cable from cooktop
E. Junction box

F. White wire (from power supply)
G. UL listed wire connector
H. Black wires
I. UL listed or CSA approved

conduit connector