Tools and materials, What’s in the box – Dacor Transitional 36 Inch Freestanding Gas Smart Range Install Guide User Manual

Page 18

18 English

Tools and mat

erials

Tools and materials

NOTE

•

Make sure you have received all of the supplied parts shown above.

•

If your range was damaged during shipping or you do not have all of the
supplied parts, contact your local retailer.

Parts needed

Gas line shut-off valve

Flexible metal appliance

connector ½" (ID) x 5 ft

Flare union adapter ¾" or

½" (NPT) x ½" (ID)

Flare union adapter

½" (NPT) x ½" (ID)

135-degree elbow

(optional)

Lag bolt or ½" (OD)

sleeve anchor

Tools needed

Flat-blade

screwdriver

Phillips

screwdriver

Open-end or

adjustable wrench

Pipe wrench (2)

Pencil and ruler

Level

Pipe joint

compound

Nut driver

Utility knife

Soapy water

solution

Tools and materials

What’s in the box

Parts supplied

Surface burner grates (3)

Burner heads (6) and Burner caps(6)

Flat rack (1)

Anti-tip bracket kit

Wok ring (1)

Gliding racks (2)

Temp. Probe (1)

Front leg covers (2)

Brass burner caps (6)

Convection filter (2)

Install_DOP36T86GLS_DG68-01106F-00_EN+MES+CFR.indb 18

2023-02-28 오전 10:32:45