Emerson Albr BDS-256XL - Manual (Page 2)

Emerson Network Power.com
Emerson Network Power.
The global leader in enabling
Business-Critical Continuity ™ .
AC Power
Connectivity
DC Power
Embedded Computing
Embedded Power
Monitoring
Outside Plant
Power Switching & Controls
Precision Cooling
Racks & Integrated Cabinets
Services
Surge Protection
Liebert Corporation
1050 Dearborn Drive
P.O. Box 29186
Columbus, Ohio 43229
800 877 9222 Phone (U.S. &
Canada Only)
614 888 0246 Phone (Outside U.S.)
614 841 6022 FAX
Via Leonardo Da Vinci 8
Zona Industriale Tognana
35028 Piove Di Sacco (PD)
Italy
39 049 9719 111 Phone
39 049 5841 257 FAX
Emerson Network Power Asia Pacific
7/F., Dah Sing Financial Centre
108 Gloucester Rd, Wanchai
Hong Kong
852 25722201 Phone
852 28029250 FAX
liebert.com
24 x 7 Tech Support
800 222 5877 Phone
614 841 6755 (outside U.S.)
[email protected] email
Albér BDS-256XL System
Specifications
Albér BDS-256XL Controller
Specifications
Parameters/Features
Number of cell channels: Up to eight strings of 256 cells per string. Up to 6 DCM-480 units per string.
Input Range/Accuracy
Cell voltage: 0 to 16V, 0.1% of reading ±1mV
String voltage: 0 to 80.00V, 0.1% of reading ±0.02V
0 to 400.0V, 0.1% of reading ±0.1V
0 to 600.0V, 0.1% of reading ±0.5V
Discharge Current: 0 to 4000A, 0.1% of reading ±1A
Note: An optional current transducer is required.
Transducer accuracy affects overall current reading accuracy.
Float Current: 0 to 5000mA ±5mA
Note: An optional current transducer is required.
Operating Environment
Temperature range: 5°C to 40°C (41°F to 104°F)
Indoor use only.
Power
Less than 5 amps at 115 VAC ±10% 60Hz (for a configuration of 8 strings of 240 cells).
Inputs
Remote alarm reset: User-supplied 12V to 32V signal. (Current draw less than 50ma.) Momentarily applying
voltage initiates the reset action.
Digital input (certain models): Sixteen l2V to 32V at less than 50mA.
Outputs
24 VAC power: Four for DCMs and External Load Modules.
Alarm contacts: Two Form C: 2A at 30VDC. (One for critical alarm; one for maintenance alarm.)
Digital output (certain models): Eight Form C: 2A at 30VDC. (Optional)
Communication
Modbus protocol, ASCII to PC, and Ethernet
Local port, USB connector (front panel).
Local port, RS-232 D8-9 connector (rear panel).
LAN port, RJ-45 (optional) (rear panel).
RJ-11 Telco line, internal14.4Kbs modem (optional) (rear panel).
Fiber optic ports: 2 TX/RX
Data Storage
SRAM (8 MB) nonvolatile memory for all configuration settings and data. Hold’s up to one year’s worth of data.
Flash memory for firmware upgrades.
Packaging
19” rack-mount. 19”W x 8.15”D x 5.25”H
Optional brackets available for mounting in 23” rack.
Optional Liebert Foundation Wallmount Cabinet
While every precaution has been taken to ensure accuracy and
completeness in this literature, Liebert Corporation assumes no
responsibility, and disclaims all liability for damages resulting
from use of this information or for any errors or omissions.
© 2008 Liebert Corporation. All rights reserved throughout
the world. Specifications subject to change without notice.
All names referred to are trademarks or registered trademarks
of their respective owners.
® Liebert is a registered trademark of the Liebert Corporation.
SL-29205 (R05/08) Printed in USA
Business-Critical Continuity, Emerson Network
Power and the Emerson Network Power logo
are trademarks and service marks of Emerson
Electric Co. ©2008 Emerson Electric Co.