Epson AcuLaser CX11 - Manual (Page 9)

Basic Copying 9
EPSON AcuLaser CX11 Series Basic Operation Guide
2. Insert a stack of documents face-up in
the Auto Document Feeder until it meets
resistance, and then move the edge
guides so they are flush with the edges
of your documents.
Note:
❏ Make sure the ADF cover is closed firmly. If
the ADF cover is open, the document table is
preemptively scanned and a blank copy is
output even if an original is set on the Auto
Document Feeder.
❏ If you load multiple pages in the Auto
Document Feeder, the pages will be fed from
the top and then ejected face-down.
Making a copy
Available paper sources:
❏ The available paper types for copying are not
the same as that for printing. Depending on
the paper source, available paper types differ.
When copying originals, you can only use
the following paper types.
MP tray:
Plain paper, EPSON Color Laser Paper,
Letterhead, Recycled paper, Colored paper,
Transparencies, Labels
Optional paper cassette:
Plain paper, EPSON Color Laser Paper,
Letterhead, Recycled paper, Colored paper
❏ You cannot copy onto coated paper, thick
paper and special paper such as postcard or
envelopes.
Available original sizes:
❏ You can use A4, B5, Letter, and Legal size
originals for copying.
❏ Legal size originals are available only with
the Auto Document Feeder.
❏ The edge of the paper (5 mm from the
horizontal and vertical paper ends) is not
guaranteed for printing.