Basic faxing (fax model only), Sending faxes, Basics of sending faxes – Epson AcuLaser CX11 User Manual

Page 11

Basic Faxing (Fax Model Only)

EPSON AcuLaser CX11 Series Basic Operation Guide

Basic Faxing (Fax Model Only)

Sending faxes

Basics of sending faxes

1. Make sure that the product is turned on.

2. Press the

Fax button on the control

panel.

The Fax light is lit and the LCD panel
shows Fax Mode for a few seconds, then
changes to the fax mode’s screen.

Note:

❏ Do not turn off the power or press

another mode’s button while faxing, as
the fax process may be performed
incorrectly.

❏ If no button is pressed for more than 3

minutes, any changes made are canceled
and the mode returns to the Print mode.

❏ Pressing the One Touch Dial button

(A, B, or C) can also enter the Fax mode
without pressing the

Fax button.

3. Place your original either on the

document table or in the Auto Document
Feeder. For details, see “Setting your
originals.”

4. Enter the recipient’s fax number directly

from the numeric keypad on the control
panel.

Note:

❏ A maximum of 50 characters can be

entered for a recipient.

❏ If an incorrect number is entered, press

the

Reset button to delete a

character left to the cursor. Pressing the
l

Left or r Right button moves the

cursor left or right.

❏ When entering the recipient number,

numerics (0 to 9), #, and

✽

can be

inserted using the numeric keypad.

❏ When you press the Redial button

instead of entering the recipient’s fax
number, the fax number you previously
transmitted is automatically entered.

❏ When pressing the Pause button while

entering the recipient number, a “-” is
displayed for the pause.

❏ You can also enter a fax number using

5. Make the appropriate settings for your

scanning purpose if necessary.

Note:
When you press the x B&W Start or
x

Color Start button without making any

settings here, the fax transmission starts
with the existing setting values.