beautypg.com

13 programme progress display, 14 programme selector dial, Functions – Electrolux EWD 1409 I User Manual

Page 9: End of programme, Altering an option or a running programme, Ee110 0, Ee2 20 0, Ee4 40 0

background image

9

End of programme

When the programme has finished a flashing zero is
displayed. The door can be opened when

the “End

pilot light

has gone out and if the Rinse hold

or

Night Cycle option has not been selected.

13 Programme progress display

By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.

After the machine has started, only the running phase
light

illuminate and

stay on.

When the programme has finished, the “

End”

pilot light

comes on.

The “

End”

pilot light flashes in the event of operating

problems and the corresponding alarm code appears on
the display.

E

E110

0

= the machine does not fill

E

E2

20

0

= the machine does not empty

E

E4

40

0

= the door has not been closed

To eliminate the problem, see paragraph “Something not
working”.

14 Programme selector dial

The selector is divided into 5 sections:

Cotton,

Synthetics

Delicates

Rinses

Prewash
Wash

Spin

End

Rinse Hold

Drain

Drying

0

• Handwash /Wool

• Special programmes

Reset programme Off

The selector dial can be turned either clockwise or
anticlockwise.
Positions E60° and E40° correspond to the ENERGY
SAVING programmes and position

to “cold wash”.

At the end of the programme the selector dial must
be turned to position OFF (reset).

Functions

End of programme

When the

End”

pilot light

on the programme progress

display illuminates, the door can be opened (

if the Rinse

hold

or Night Cycle option has not been selected)

.

Turn the programme selector dial to Off.
Switch the machine off by depressing the ON/OFF
button before removing the laundry.

Altering an option or a running programme

It is possible to change any option before the
programme carries it out. Before you make any change,
you must pause the washer dryer by pressing the

Start/Pause

button.

Changing a running programme is possible only by
resetting it. Turn the programme selector dial to "Off"
and then to the new programme position. The washing
water in the tub will not empty out .
Start the new programme by depressing the

Start/Pause

button.

Off

95°

Miniprogram

Easy Iron

Drying

Drying

Spin

Drain

Rinses

Cotton

Synthetics

Delicates

Handwash

40°

40°

30°

60°

E40°

30°

60°

40°

E60°

E60°

40°

30°

30°