Electrolux EWD 1409 I - Manual (Page 12)

12
5. Select the Spin speed or Rinse
Hold option
Depress the spin speed button to choose the required
speed or Rinse Hold option
: the corresponding
light comes on.
6. Select the required options
The light corresponding to the depressed button
illuminates.
7. Select the Delay Start option
To delay starting of a programme, press the “Delay
start” button. The corresponding light illuminates. The
figures corresponding to the selected delay will be
displayed for about 3 seconds, after which the duration
of the selected programme will appear on the display.
When the Start/Pause button is pressed, the selected
delay will again appear on the display and the machine
starts its countdown.
Delay
start
Prewash Quick
wash
Night
Cicle
Sensitive
Spin
speed
1400
1200
900
700
During this period it is possible to load other laundry:
press the Start/Pause button. Open the door. Load the
laundry. Close the door and press the Start/Pause
button again.
8. Start the programme
To start the selected programme, press the Start/Pause
button; the corresponding light stops flashing and
the
pilot light corresponding to the wash phase which is
running illuminates.
The machine starts operating.
If the Delay Start option has been selected the
programme will start at the end of the countdown.
9. At the end of the programme
The machine stops automatically. The display shows a
blinking zero.
If the Rinse Hold or Night Cycle option has been
selected, the door will be locked, the light of the
Start/Pause button goes out, the Rinse Hold
and
“End” lights in the programme progress display remain
lit to indicate that the water must be drained before
opening the door. The display shows a flashing zero.
To empty out the water you can, after turning the
programme selector dial to Off position:
● select programme Drain, the water is emptied out
without spinning
● select programme Spin. Select the spin speed by
means of the relevant button and then depress the
Start/Pause button. The water is emptied out and the
laundry is spun at the selected spin speed.
At the end of the cycle, the light of the Start/Pause
button goes out, and the End light
illuminates. The door
can be opened.
Turn the programme selector dial to Off (Reset).
Start/
Pause