Epson A881391 - Manual (Page 19)

Cleaning the Monitor
To keep the monitor operating at its best, it is important to
clean it regularly. Follow these steps:
1. Turn off the monitor and unplug the power cord from the
wall outlet. Also disconnect the video interface cable from
the computer.
2. Use a damp, lint-free cloth to wipe the monitor casing; do
not use a wet cloth.
3. To clean the screen, spray a household glass cleaner on a
cloth; then wipe the screen.
caution
To avoid electric shock, do not spray cleaner directly on the
monitor. Do not use solvents, abrasives, or aerosol cleaners
to clean the monitor; they can discolor the casing or damage
the anti-glare surface of the screen.
Troubleshooting
This section gives solutions to monitor problems you might
encounter. If these procedures do not solve the problem, see
page 2 for information on where to get help.
The power indictor light does not light.
1. The monitor’s power may not be on. Press the power button.
2. The power cord might be unplugged or not fully connected.
Make sure the power cord is properly connected to both the
monitor and the electrical outlet.
14” Super VGA Color Monitor 11