Paper improperly loaded, Paper is not ejected fully or is wrinkled, Printer does not print – Epson 925 User Manual

Page 87

❏ The left edge guide is adjusted to fit your paper.

❏ The printer is on a flat, stable surface that extends beyond the

printer base in all directions. The printer will not operate
properly if it is tilted.

Paper improperly loaded

If you have loaded the paper too far into the printer, the printer
cannot feed the paper correctly. Turn the printer off and gently
remove the paper. Then turn the printer on and reload the paper
properly.

Paper is not ejected fully or is wrinkled

Try one or more of these solutions:

❏ If the paper does not eject fully, press the

maintenance

button, then open the printer cover and remove the paper.
Also, check the Paper Size setting in the Control Panel.

❏ If the paper is wrinkled when it comes out, it may be damp

or too thin. Load a new stack.

Note:
Store any unused paper in its original packaging in a dry area. See
“Paper” on page 95 for specifications

Printer Does Not Print

If the printer does not print, check and see if one of the following
error indications is displayed, then try the solutions listed.

❏ All lights are off