Printout has smears on the bottom edge, Printing is too slow, Paper does not feed correctly – Epson 925 User Manual

Page 84: Blank pages print

❏ Printout has smears on the bottom edge

❏ Printing is too slow

Blank pages print

❏ Run the Head Cleaning utility to clear any clogged

Printout has smears on the bottom edge

❏ If the paper is curled toward the printable side, flatten it or

curl it slightly in the opposite direction.

❏ Set the adjust lever to the “+” position.

Printing is too slow

❏ Make sure that the Media Type setting in the Control Panel is

correct.

Paper Does Not Feed Correctly

If one of the following problems has occurred, try the solution(s)
listed for that problem.

❏ Paper does not feed

❏ Multiple pages feed

❏ The paper jams

❏ Paper is not ejected fully or is wrinkled