DCS 20 Inch Built-in Outdoor Storage Drawer: Single Drawer Installation Instructions - Manual (Page 14)

14
10b INSERT PRODUCT INTO CAVITY & SECURE
1 With the help of an assistant, lift the unit and slide it into the cabinet cutout along the supports. Adjust for level and fit.
2 Locate the mounting holes (front top left and right sides and front base of drawer compartment).
3 Remove the transit plugs from the holes you intend to use.
4 Secure the unit using countersunk screws suitable for the type of cabinetry materials used.
We recommend using all the shown hole locations for securing.
3
mm)
Refer to Step 9b for screw
mounting hole positions