LG 50 Pint Smart Dehumidifier Owner's Manual - Manual (Page 9)

8 OPERATION
ENGLISH
OPERATION
Control Panel and Display
1 Safety Standby light (red)
After 23 hours of continuous operation, the red lamp lights
up for 1 hour.
2 Power button Starts and stops the product.
3 Fan Speed control button
Adjusts the fan speed and air volume.
Wi-Fi - To turn the Wi-Fi function on, press and hold the
button for 3 seconds.
※
To turn the Wi-Fi function off, press and hold the Power
button and the Fan Speed control button at the same
time for 3 seconds.
4 Fan Speed indicator lights Light up to indicate fan speed (High/Low).
5 Humidity display
Displays the current humidity (25-90 %) and the humidity
setting (30-80 %).
6 Humidity control button
Adjusts the humidity setting. Desired humidity levels can
be set in 5-percent increments from 30-80 %.
7 Timer button
Sets a time for the product to automatically turn off.
Press the button repeatedly to increase the time until
shutoff in 1-hour increments up to 12 hours.
Filter Reset - After cleaning the filter, press for 3 seconds
to reset operating time.
8 Pump button
Press and hold until the Pump Standby LED lights up to
turn the pump on in standby mode. Press again to turn the
pump off. When the water bucket is full, if the pump is in
standby mode it will automatically turn on and remove the
collected water using the included pump hose.
9 Auto Defrost light Lights up when the product is defrosting.
10 Bucket Full light Lights up when drain water bucket is full.
11 Check Filter light
Lights up after 350 hours of operation. Check and clean
the filter.
12 Timer On light Lights up when the Timer function is set.
13 Pump Standby light Lights up when the pump function is turned on.
14 Wi-Fi On light Lights up when the Wi-Fi function is connected.
15 Timer Function light Lights up when the Timer function is set in the app.
1 9 10 13 4 11 14
2 5 15 6 7 8 12 3