LG 50 Pint Smart Dehumidifier Owner's Manual - Manual (Page 6)

SAFETY INSTRUCTIONS 5
ENGLISH
CAUTION
To reduce the risk of injury to persons, malfunction, or damage to the product or property when
using the appliance, follow basic safety precautions, including the following:
INSTALLATION
• Use this appliance only for its intended purpose.
This product is not designed for preserving precision instruments, tableware or art works.
• Use the appliance only in a well-ventilated area.
Keep the area well ventilated, especially if also using a combustion appliance. Inadequate
ventilation reduces the oxygen level in the air.
• Never unplug the appliance by pulling on the power cord. Always grip the plug firmly and pull
straight out from the outlet.
• Do not use the product in places where chemicals are used.
Chemicals and solvents dissolved in the air in places such as hospitals, factories, laboratories
and hair salons could cause product deformation and leaking, resulting in property damage.
• Turn off the dehumidifier and pull out the power plug before cleaning.
Wait for the fan to stop moving.
• Do not operate the dehumidifier without a filter.
Using the product without a filter could result in a reduced product lifespan, electric shock or
injury.
OPERATION
• Do not use the product for preserving animals/plants, precision instruments, art works etc.
• Do not place vases or water jars on the dehumidifier.
• Turn off the dehumidifier and empty the water bucket before moving the dehumidifier.
• Pull out the power plug if you will not be using the product for an extended period.
• Do not use the product in a very small space such as a closet.
Poor ventilation could result in overheating or fire.
• Do not use wax, thinner or a strong detergent when cleaning. Wipe the product using a soft
cloth.
Using inappropriate cleaning products could cause the product to become discolored or develop
surface flaws.
• Do not use the product in direct sunlight or rain.
• Do not touch the product with wet hands.
• Position the product on a firm, stable surface.
• Remove cable ties and extend power cord before use.
• Do not spray foreign substances or water on the product.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
!