Emerson 7003M - Manual (Page 37)

Operator Manual
748223-K
June 2002
Rosemount Analytical Inc. A Division of Emerson Process Management Operation 3-11
Model 7003M
3-5 SETUP MODE
Refer to Figure 3-3 on page 3-12 and Table
3-16 below. From the SET-UP mode the
operator can:
• Change security code
• Set output current range (0-20mA or 4-
20mA)
• Set output concentration range endpoints
• Adjust zero offset
KEY DISPLAY WHAT HAPPENS
DISPLAY Nothing Nothing
ACK "<4>-0" / "4-<0> Selects 4-20 or 0-20 mA operation
ALARM 1 Nothing Nothing
ALARM 2 Nothing Nothing
UP ARROW 10.8 →10.9 Changes the number displayed
DOWN ARROW 10.9 →10.8 Changes the number displayed
CAL Nothing Nothing
ENTER various to "run" Moves to the next step or goes to RUN mode
Table 3-16. SETUP Mode Key Functions