beautypg.com

Replacing filter, Charcoal filter – Viking 30 Inch Over-the-Range Microwave Oven Owners Manual User Manual

Page 36

background image

34

E

Charcoal Filter

Charcoal Filter, which was installed in your Built-in Microwave Hood,

is used for nonvented, recirculated installation. The filter should be

changed every 6 to 12 months depending on use.
1. Disconnect power to the oven at the circuit breaker panel or by

unplugging.

2. Remove the two top louver mounting screws. (See illustration.)
3. Pull the louver away from the unit.
4. Remove the charcoal filter holder by removing the center mounting

screw.

5. Change the charcoal filter.
6. Replace the filter holder and center mounting screw.
7. Carefully push the louver back into place and replace the screws

removed in step 2.

Louver

Charcoal filter

(white side faces front)

Screw

Screw

Screw

Pr

oduct Car

e

Pr

oduct Car

e

Replacing Filter