Viking 30 Inch Over-the-Range Microwave Oven Owners Manual - Manual (Page 32)

30 E
Operation
Multiple Sequence Cooking
Your Built-in Microwave Hood can be programmed for up to 4 auto-
matic cooking sequences, switching from one power level setting to
another automatically.
Sometimes cooking directions tell you to start on one power level and
then change to a different power level. Your Built-in Microwave Hood
can do this automatically.
• Roast beef - cook for 5 minutes at 100% and then continue to cook
for 30 minutes at 50%.
1. First enter cooking time. Then touch Power Level pad once for 100%
power.
2. Enter second cooking time. Touch Power Level pad 6 times for 50%
power.
3. Touch START/Add-A-Minute pad.
NOTE:
• If Power Level pad is touched once, HIGH will be displayed.
• If 100% is selected as the final sequence, it is not necessary to touch
the Power Level pad.
• Keep Warm Plus can be programmed even if 4 cooking sequences
have been set.
More or less time adjustment
Should you discover that you like any of the Instant Sensor, Sensor
Cook, Defrost, Reheat or Hot Water settings slightly
more done, touch
the Power Level pad once after touching your choice of pads or before
touching START/Add-A-Minute pad. The display will show MORE .
Should you discover that you like any of the Instant Sensor, Sensor
Cook, Defrost, Reheat or Hot Water settings slightly less done, touch
the Power Level pad twice after touching your choice of pads or before
touching START/Add-A-Minute pad. The display will show LESS .
Control Panel and Settings