Thermador Masterpiece Series 30 Inch Built-In Microwave Use and Care Guide - Manual (Page 14)

14
Operating the appliance
You have already learned about the controls and how
they work. Now we will explain how to apply settings on
your appliance. You will learn about what happens when
you switch the appliance on and off, and how to select
the operating mode.
Setting the appliance
Switching the Appliance On and Off
Touch the ON l OFF touch button to switch the appliance
on or off.
The appliance will automatically go to the main menu.
Changing the settings of the current mode
You can change the settings during operation. Touch the
touch field of the value you want to change.
Pausing the operation
Touch the START l STOP touch button to pause the
operation. Press the START l STOP touch button again to
continue the operation.
Opening the appliance door interrupts the operation.
Touch the START l STOP touch button once the door has
been closed. The operation continues.
Opening the appliance door
If you open the appliance door during an operation, the
operation is paused. To continue operation, close the
door and touch the START l STOP touch button.
Note: For some types of heating, the operation
continues to run even when the appliance door is open.
Changing the operating mode
Touch the START l STOP touch button, then set a
different mode. Touch the ; symbol to navigate to the
main menu.
Switching the appliance off
Touch the ON l OFF touch button.
Operating features
Your appliance has several additional operating features
that help you to use the appliance correctly and
effectively.
Default values
The appliance suggests a setting for each operating
mode. You can accept this value or change it in the
appropriate area.
Status bar
The status bar fills in from left to right on the display. It
indicates a visual display of the set microwave duration.
INFO Touch Button
If the INFO touch button lights up, important information
regarding the mode you are using is available. This may
include for example recommendations on suitable
cookware or how to prepare food for a safe cooking
result. When you touch the INFO touch button, the
information is displayed for a few seconds.
To exit the INFO text immediately, touch the INFO touch
button or the display.
Sounds
The appliance uses various sound signals during
operation. A sound signal can be heard whenever you
use a touch button or touch field, or when an operation is
started or finished. You can adjust these sounds in the
Settings menu. ~ "Adjust Basic Settings" on page 23
Notification display
Whenever an operation or timer is finished, a notification
appears on the display. Touch the display screen to
confirm and continue operation.