Edimax Technology Multi-Homing Broadband Router - Manual (Page 71)

Client PC IP Address
Input the IP address of a particular host in your LAN that will
receive all the packets originally going to the WAN port/Public IP
address above
Note: You need to give your LAN PC clients a fixed/static IP
address for DMZ to work properly.
Add DMZ
Fill in the "WAN Port", "Public IP Address” and “Client IP
Address” of the DMZ to be added and then click "Add".
Then this DMZ entry will be added into the "DMZ Table"
below. If you find any typo before adding it and want to
retype again, just click "Clear" and the fields will be cleared.
Remove DMZ
If you want to remove some DMZ from the "DMZ Table",
select the DMZ entries you want to remove in the table and
then click "Delete Selected". If you want remove all DMZ
entries from the table, just click "Delete All" button. Click
"Reset" will clear your current selections.
You can now configure other advance sections or start using the router (with the advance settings
in place)
71