Edimax Technology Multi-Homing Broadband Router - Manual (Page 57)

2.4.5 Protocol and Port Binding
Protocol and Port Binding let you manually bind an application to a WAN port. Only
packets that match all the entered criteria will be bound to the assigned WAN port. You
can have to fill all the items. The items that you leave blank will be ignored.
Parameters
Description
Enable Protocol & Port Binding The “Protocol and Port Binding” function is default disabled. You
can select to enable the “Protocol and Port Binding” function.
Source IP Range
Only packets with this assigned source IP range will statically
bind to the assigned WAN port. If you assign 192.168.2.3 –
192.168.2.5, it means 3 IP addresses: 192.168.2.3, 192.168.2.4
and 192.168.2.5
Destination IP Range Only packets with this assigned destination IP range will
statically bind to the assigned WAN port. If you assign
192.168.2.3 – 192.168.2.5, it means 3 IP addresses: 192.168.2.3,
192.168.2.4 and 192.168.2.5
Source Port Range Only packets with this assigned source port range will statically
bind to the assigned WAN port.
Destination Port Range
Only packets with this assigned destination port range will
statically bind to the assigned WAN port.
57