beautypg.com

Eagle Electronics FishElite User Manual

Page 15

background image

7

MapCreate map. There is so much detail in our background map (and
even more in MapCreate) that we'll describe their contents and differ-
ences in Sec. 6, Basic GPS Operations, on page 91.

Another portion of the unit's onboard memory is devoted to recording
GPS navigation information, which includes waypoints, event marker
icons, trails and routes. This lets you look back the way you came.
Think of this data storage like the hard drive memory in a computer or
a tape in a cassette tape recorder. You can save several different GPS
data files, erase 'em and record new ones, over and over again. Like any
computer file, these

GPS Data Files (file format *.usr) can be shared

between Eagle GPS or sonar/GPS units or even personal computers.

This unit has one more thing in common with a personal computer.
Just as computers have a floppy disk drive for storing and exchanging
files, the unit has a slot for an MMC (MultiMedia Card) or SDC (Secure
Digital card) flash memory card. These solid-state memory devices are
about the size of a postage stamp, but can hold data ranging from 8 MB
to 128 MB in size. (Compare that to a floppy disk's 1.44 MB capacity!)
This unit uses all that MMC space for two key GPS purposes. (The
MMC is also used to record sonar logs…see page 6.)

First, you can backup your onboard GPS Data Files by copying them to
the MMC. Since the MMC is removable (like a floppy disk or a cassette
tape), you can store these GPS Data Files on a personal computer
equipped with an MMC card reader. (Or store them on a pocketful of
MMCs, if you don't have a computer.) Our MapCreate mapping soft-
ware can save, edit or create its own GPS Data Files, which can be
copied to the MMC and then loaded from the MMC into the unit's
memory. (NOTE: No matter where they come from, GPS Data Files
must be loaded from the MMC into memory before the unit can use
them.)

The other key GPS use for MMCs is storage of special high-detail, cus-
tom maps, which you can produce on your computer with our MapCre-
ate software. These MapCreate custom maps contain much greater de-
tail than the basic background map. These

Custom Map Files (file

format *.lcm) can also be shared between Eagle GPS or sonar/GPS
units and personal computers.

This unit automatically reads Custom Map Files directly from the
MMC or SDC. To use a custom map, all you need to do is slide an MMC
containing a map into the unit.

This manual is related to the following products: