DJI Transmission Standard TX/RX Combo - Manual (Page 13)

13
EN
Appendix
Firmware Update
Update the video receiver using the DJI Assistant 2 (Ronin Series) software.
1. Power on the device. Make sure the Type-C function is set to USB on the menu. Connect the
device to a computer with a USB-C cable.
2. Launch DJI Assistant 2 (Ronin Series) and log in with a DJI account.
3. Select the device and click Firmware Update on the left side of the screen.
4. Select the firmware version.
5. The firmware will download and update automatically.
6. The device will restart automatically after the firmware update is complete.
Specifications
Weight Approx. 350 g (receiver only, excl. antennas)
Dimensions 127Ч87Ч26 mm (excl. antennas)
Operating Frequency [1] 2.4000-2.4835 GHz, 5.150-5.250 GHz,
5.250-5.350 GHz, 5.470-5.725 GHz, 5.725-5.850 GHz
Transmitter Power (EIRP) 2.4 GHz: <33 dBm (FCC), <20 dBm (SRRC/CE/MIC)
5.8 GHz: <33 dBm (FCC), <14 dBm (CE), <23 dBm (SRRC)
Power Consumption 9 W
Power Supply Voltage 6-18 V
Output Voltage 6-18 V
Battery Life [2] 3 hours 50 minutes
Output Video Format • When used with the DJI Video Transmitter:
1080p: 23.98/24/25/29.97/30/50/59.94/60fps
720p: 50/59.94/60fps
• When used with Ronin 4D:
1080p: 24/25/30/50/60fps
Output Audio Format SDI embedded, HDMI embedded
Video Transmission System O3 Pro
Max Bitrate 40 Mbps
Latency 70 ms (1080p 60fps)
Video Coding Format H.264
Max Transmission Distance 6 km (FCC), 4 km (CE/SRRC/MIC) (Unobstructed, free of
interference)
Max Bandwidth 40 MHz
Operating Temperature [3] -10° to 45° C (14° to 113° F)
[1] Due to local regulations, the 5.1/5.2/5.8 GHz frequencies are prohibited in some countries and the 5.1/5.2
GHz frequencies are only allowed for use indoors in some countries. 5.600-5.650 GHz is not used.