Control broadcast, Linking status indicator, Broadcast mode – DJI Transmission Standard TX/RX Combo User Manual
Page 10: Connect, Searching

10
EN
1. Power on the video receiver. Press the menu dial on the video receiver to enter the menu.
2. Press the dial to enter the Connect menu, turn the dial to select Broadcast in the menu, and
then press the dial to confirm.
3. Wait for the search results to be complete and select a device to connect.
• In Broadcast mode, press and hold the dial to refresh the search results.
Linking Status Indicator
Linking Status Indicator
Description
Solid red
Device started, not connected.
Blinks red and green alternately
Linking.
Solid green
Successfully linked in Control mode. Wireless video
transmission is normal.
Broadcast mode enabled.
Blinks red
Device malfunction. Contact DJI Support.
Connect
Control
Broadcast
Searching...
the Ronin 4D High-Bright Main Monitor, tap Transmission, and then Link Device. The linking
status indicator on the video transmitter blinks red and green alternately, indicating the
device is linking.
4. When linking is complete, the linking status indicator on the video receiver turns solid green
and the video receiver can communicate with the transmitter device.
Broadcast Mode
In Broadcast mode, an unlimited number of video receivers used as monitoring devices can
connect to the transmitter device. In scenarios using multiple transmitter devices, video
receivers in Broadcast mode can select the desired transmitter device quickly to achieve multi-
channel monitoring.