Emerson Libert AC Power System - Manual (Page 3)

Liebert MP Advanced Power Strips are
offered in two basic systems:
Liebert MP-M Series — Monitors electrical attributes of an individual
power strip. Provides real-time remote and local display of total strip
true RMS volts, amps and watts. Other capabilities include:
■ Ambient temperature measurements.
■ Easy viewing LCD that displays power readings.
■ Re-nameable receptacles for inventory tracking.
■ Telnet and SNMP Support.
■ Audible alarm and receive alarms based on preset thresholds.
■ User authentication for added security.
■ Vertical or horizontal rack-mounted versions.
Liebert MP-C Series — These controlled power strips provide the
same remote monitoring capabilities as the MP-M Series with the
addition of individual, remote receptacle on/off control and local
display of powered receptacles. This added capability allows you to:
■ Reboot unresponsive equipment.
■ Turn off unused receptacles.
■ Link receptacles to manage load groups.
■ Log and maintain receptacle connectivity.
■ Audit circuit prior to plugging in more equipment.
■ Audible and LED alarm warnings.
A Choice Of Capacities And Receptacles
To support the increasing electrical loads in network equipment, Liebert
MP Advanced Power Strips are offered in higher voltage and amp ratings
than standard multi-outlet units. A number of power control, distribution
and receptacle configuration options are available, including:
■ Single-phase input/output, 120VAC & 208VAC.
■ Three-phase input/single-phase output.
■ 15-30 amp capacities, single NEMA input plug,
NEMA or IEC output receptacles.
■ 1U rack-mount and zero U vertical
mount configurations.
■ Rack-mount with 8-10 outlets,
vertical with 12-24 outlets.
3
Liebert Brings You End To End Solutions
For Your Critical IT Systems Support
Liebert MP Advanced Power Strips are just part
of our optimized “end to end” solutions, providing
power and environmental support from the rack
on through the entire critical space. As always, the
Liebert objective is supporting business continuity,
by protecting your business critical systems and
networks against the causes of downtime.
Network Card
Expansion Cards
OpenComms EM
MP-S
Access
Server
Ethernet
Remote/Network Access
OpenComms EM
1 or 2 Power Strips
MP-S Access Server
1 to 32 Power
Strips / Expandable
More Configurations
For More Flexibility