Setup, Fax reception modes – Epson C823301 User Manual

Page 3

Setup

Setting up your fax board is a four-step process:

1. Set the DIP switches on the board.

2. Install the board in your printer.

3. Plug the appropriate cables into the board.

4. Perform a self test.

Before you install your fax board, you need to make a number

of choices about how your fax board will work. Read the

descriptions below, make your choices, and then proceed with

your setup.

Fax reception modes

This board has three fax reception modes:

Automatic reception-it starts to receive a fax when the

ring signal is detected.

Selective reception-it starts to receive a fax either 15 or

30 seconds after it detects a ring signal (depending on the

setting you select).

Manual reception-you have to use software or press the

manual reception button to receive a fax.

Setup