Setting the hob for the new gas type – Electrolux 79902G User Manual

Page 34

Setting the hob for the new
gas type

1. If necessary, activate the hob by touching

the main ON/OFF Control

for about 3

seconds.

2. Touch the Timer Control

repeatedly to

select the auxiliary burner (front left burner)
on the burner selection display .

3. Touch the Increasing Control

and hold

the finger on it until the value 99 appears
on the time display. Then, touch the
Decrasing Control

and hold the finger

on it until the value 80 is displayed.

4. Then, touch the Increasing Control

until

83 is displayed. At this point, the hob is set
to the “Gas Change” mode and the current
gas setting appears on the display:

stands for gas G20 (20 mbar)

for gas G30 (28-30/37 mbar).

IMPORTANT: setting

does not allow

the hob to function.