Epson STYLUS 7900 - Manual (Page 217)

217
Using the Optional Auto Take-Up Reel | 217
Printing Using the Auto Take-Up Reel
Once the Auto Take-Up Reel is installed and paper is attached to it, you can
use it to take up your prints.
1. Set the Auto switch to Forward or Backward , depending on how you
set up the paper.
2. Send a print job to the printer. The Auto Take-Up Reel takes up the roll
paper 1/4 to 1/2 turn at a time.
3. When you are ready to remove your prints, set the Auto switch to Off.
4. Press the button to cut the paper.
WARNING: Do not touch
the Auto Take-Up Reel
while it is operating; doing
so may result in injury.
Turn off the Auto Take-Up
Reel before removing the
reel; if the reel operates
unexpectedly, bodily
injury may occur.