Winding prints backward – Epson STYLUS 7900 User Manual

Page 216

216

216

Using the Optional Auto Take-Up Reel

Winding Prints Backward

1. Wind the bottom of the roll paper around the back of the reel as shown

below, then tape the leading edge of the paper to the reel in three places.

2. Press the d button to feed the paper forward and create some slack.

3. Set the

Manual

switch on the Auto Take-Up Reel to

Backward

to take

up at least three turns of paper onto the reel. Make sure adequate slack
remains between the roll paper and the take-up reel.