EdgeStar AP10002BL User Manual
Page 17
Edgestar Portable Air Conditioner
14
Timer:
The timer can be used to either turn the unit on or off after a
number of elapsed hours. The timer is adjustable between 0.5-24
hours in one hour increments.
.
How to set the unit to automatically turn on
:
1) Press the Timer button on the remote control while the unit is
powered off.
2) Use the Up and Down buttons on the remote to set the time
(displayed in hours) you want to pass before the unit turns on. After
the selected time passes, the unit will automatically turn on.
How to set the unit to automatically turn off
:
1) Press the Timer button on the remote control while the unit is
powered on. The Timer indicator LED will light up
2) Use the Up and Down buttons on the remote to set the time
(displayed in hours). The unit will automatically turn off after the
selected time elapses.
Sleep:
Press this button, Sleep On and Sleep Off can be selected. After
powered on, Sleep Off is defaulted. After the unit is turned off the
Sleep Function is canceled. After function set up, the signal of
Sleep will display. In this mode the time of the timer can be
adjusted. Under Fan/Auto Mode, this function is not available.
Energy Saving Guide
Read and follow the guide below to get the best performance and
efficiency from your portable air conditioner:
Do not cover the air outlet (exhaust) while in use.
Do not place the unit in front of curtains or drapes- to ensure
they do not obstruct the air intake.
Minimize the length of the exhaust hose.
Make sure the exhaust hose is as straight as possible and avoid
kinks or bends.
Keep curtains, blinds or drapes closed during the sunniest part
of the day.
Use the timer to operate the unit before it is needed. For
example, set the timer to turn on the unit in cooling mode for 3
or more hours to cool the room before you arrive. You may want
to operate the unit all day if you live in a warmer climate.
Minimize the heat sources (direct sunlight, computers, servers,
people, etc.) in the room.
Close all windows and doors.
Use the unit in a contained room. For example, a room with four
walls and a ceiling, instead of a partitioned studio, or
warehouse.
Make sure the unit is on a level surface.