Esoteric D00864200A - Manual (Page 19)

19
When the STOP button is pressed with a video DVD or video
CD, playback is stopped, and the display shows “RESUME”.
Pressing PLAY continues playback.
Pressing any of the following buttons cancels resume mode:
STOP, OPEN/CLOSE, POWER.
Opening and closing the tray
Playback control (with PBC enabled) video CDs
With these discs, the number buttons can sometimes be used
to select menu items.
Jump between pages of multi-page menus (on some video
CDs) with the SKIP buttons (.//).
< Pressing RETURN during playback returns to the menu of a
PBC video CD.
< Note that the DISPLAY, REPEAT and PROGRAM buttons do
not work during PBC playback.
Playback without PBC
In the stop mode press the number buttons or SKIP buttons
(.//) and PLAY button to playback video CDs without
using the PBC facility.
DVD audio discs with picture stills
Use the SLOW buttons ( / ) to change between still
images that are shown when some DVD audio discs are
played back.
Pausing playback (freezing the picture)
Press the PAUSE button to pause audio playback (the ring
surrounding the PAUSE button on the main unit lights). Any
DVD or video CD image is frozen.
Press PLAY or PAUSE to restart playback.
< If the still picture appears blurred or noisy, reconfigure the still
mode to “field” (see page 39).
< Caution - do not leave player in the “pause” mode for
extended periods of time. Damage to your television or the
player may occur.
Stopping playback
Press the STOP button (the ring surrounding the STOP button
on the main unit lights).
With a video DVD or video CD, the unit enters resume mode
(see the next section). Pressing STOP once again stops
playback completely.
Resume mode
Pressing OPEN/CLOSE opens the tray if it is closed, and closes
it if it is open. When the tray is opened during playback, it
may take a few seconds before the disc is “unloaded” and
the tray opens.