Electrolux LAVAMAT 42230 - Manual (Page 33)

33
Installing your washing machine
Removing transport packing
Warning!
All parts used to protect internal components of the washing machine
during transport must be removed before you use the washing machine for
the first time. Keep these parts and their attachments in case you need to
transport it again.
1.Remove the outer packaging from the washing
machine. Tilt it backwards, rotate it by a quarter of a
turn on one of its back corners to take it off the
transport base. It will naturally be separated from the
washing machine.
2.Open your washing machine cover and take out the
packing that holds the drum in place and the plastic
wedge. Close the cover again.
3.Use a spanner to unscrew and remove the two spacers
(A) at the back of the washing machine.
4.Now put the closers (B) provided in the pack attached
to the washing machine into position to close the
openings that became visible, and do not forget to
fold back the plug into the middle.
Installation and connection instructions
+3#
B
+"#3
A