Electrolux EWG 12450 W - Manual (Page 13)

use electrolux 13
Select the spin speed, Rinse Hold
or No Spin option by pressing
button 3
Press button 3 repeatedly to change
the spin speed, if you want your
laundry to be spun at a speed different
from the one proposed by the washing
machine. The relevant light will light up.
When you select a programme, the
machine automatically proposes the
maximum spin speed provided for the
programme.
Rinse Hold: by selecting this option
the water of the last rinse is not
emptied out to prevent the fabrics from
creasing. When the programme has
finished the display shows
0.00
flashing, the pilot light 9 is on, the light
of button 8 is off and the door is
locked to indicate that the water must
be emptied out.
To empty the water out, please
read the chapter «At the end of the
programme».
No spin : by selecting this option, all
spinning phases are suppressed and
replaced by a drain, so as not to
wrinkle the laundry.
On some programmes the rinses will
be performed with more water.
Select the Easy Iron option by
pressing button
4
By selecting this button the laundry is
gently washed and spun to avoid any
creasing. In this way ironing is easier.
Furthermore the machine will perform
some additional rinses for cotton and
synthetics
.
In the programmes for cotton the spin
speed is automatically reduced.
This function can be used for cotton
and synthetic fabrics.
Select the Extra Rinse option by
pressing button
5
The machine performs some additional
rinses. This option is recommended for
people who are allergic to detergents,
and in areas where the water is very
soft.
Select the Delay Start by pressing
button
6
Before you start the programme, if you
wish to delay the start, press button
6
repeatedly, to select the desired delay.
The relevant light will illuminate.
The selected delay time value (up to 20
hours) will appear on the display for a
few seconds, then the duration of the
programme will appear again.
You must select this option after you
have set the programme and before you
press button
8 .
The door will be locked throughout the
delay time. If you wish to add laundry in
the machine during the delay time you
will press button
8 to put the machine
in pause and wait until the pilot light 9
goes out before opening the door. Add
the laundry, close the door and press
the button
8 again.
You can cancel or modify the delay time
at any moment, before you press
button
8 .
The wash programme can be delayed
from 30 min - 60 min - 90 min, 2 hours
and then by 1 hour up to a maximum of
20 hours by means of this button.
Selecting the delayed start.
• Select the programme and the
required options.
• Select the delay start.
N
s
re
w
O
th
w
132964710.qxd 19/07/2008 12.21 Page 13