Electrolux 55750 - Manual (Page 15)

15
A washing program can be selected first, and
then the pre-selected start time can be proĆ
grammed, or vice versa.
If a pre-selected start time is programmed without a
washing program, the programmed time goes out after
5 seconds. After selecting a program, the selection of
the start delay must take place within 5 seconds.
An activated pre-selected start time will be indicated
in the display field by a blinking dot.
After the pre-selected start time has expired, the
machine starts up the selected program automatiĆ
cally.
Correcting or Deleting the
Program Selection / Pre-seĆ
lected Start Time
Using the Stop button, a running program or the pre-
selected start time can be interrupted or cancelled.
Interruption:
- Briefly activating the Stop button causes an interĆ
ruption of all programs, and the Stop control lamp
blinks.
- Activating the Stop button again makes the proĆ
gramming active once again.
Cancelling:
- Holding down the Stop button longer than 2 seĆ
conds deletes the program and the pre-selected
start time, and any water present will be pumped
out. The Program End symbol in the display lights up
as soon as all the water has been pumped out.
ECO button
The wash temperature is reduced using the ECO button,
as a result less energy is consumed during heating up.
The economy button can be selected for all wash proĆ
grams.
The ECO button should be used in particular when
using low-alkali compact cleaners with enzymes. The
enzymes produce their full dirt-releasing effect in a
temperature range between 40 and 50 ° C.
Mains switch
Half load
Economy