Peavey VSX 48e Programmable Loudspeaker Management System (1 RU, 4 Inputs, 8 Outputs) - Manual (Page 20)

20
Input Impedance: 20 k Ohms
Output Impedance: 100 Ohms
Frequency response Input to Output: +0/ -0.5 dB 10 Hz to 21 kHz
+0/ -1.0 dB 10 Hz to 32 kHz
Maximum Input level: +20 dBu
Maximum Output level: +20 dBu
THD + N @ 1 kHz: 0.007%
Noise floor 22-22kHz -87 dBu unweighted -89 dB A-Weighted
Dynamic range > 107 dB unweighted 109 dB A-Weighted.
Crosstalk between channels: Less than -100 dB at 1 kHz.
LED Meter Input:
LED Color Label dBu * dBFS *
Red Clip +15 -5
Yellow +5 +5 -15
Green 0 0 -20
Green -10 -10 -30
Green -30 -30 -50
LED Meter Output:
LED Color Label dBu * dBFS *
Amber Limit - -
Red Clip +15 -5
Green 0 0 -20
Green -10 -10 -30
Green -30 -30 -50
*Note References: 0 dBFS = Maximum signal level before clipping (Full Scale)
0 dBu = 0.775 V rms
Latency analog input to analog output: 3.5 mS
Specifications