Peavey VSX 48e Programmable Loudspeaker Management System (1 RU, 4 Inputs, 8 Outputs) - Manual (Page 18)

18
Output Equalization Edit Screen
The output equalization can be adjusted using this screen. When you select a PEQ band # at the bottom left of
the screen, the parameters for that band can be adjusted using the PEQ Parameter sliders. A PEQ band can also
be adjusted by selecting the corresponding band on the graph with the mouse and dragging it to set frequency
and amplitude. While holding mouse button down, the Q can be adjusted using the + and - keys. If you double
click on a parameter in the PEQ matrix, you can directly type in a new value. The graph can display either the
magnitude of filter responses or the resulting phase response. The graph of other outputs can also be overlaid on
the screen by clicking boxes on top of the graph.