E&J TRAVELER 3F02-INS-LAB-REVB10 User Manual
Page 25
3F02-INS-LAB-RevB10, March 2010 • Traveler L4 User Manual
25
Check tire wear
Examine tires at least once a week for surface wear and cracks and
replace them as needed. Replace polyurethane tires when they become
loose on the rims or cracks appear.
Check handrims
Check handrims at least once a week. Inspect each handrim for rough or
sharp edges and, if any are found, replace handrims immediately. Ensure
that all hardware is properly aligned and secure.
Check wheel lock engagement
Check wheel lock engagement at least once a week. See Adjust wheel
locks in Section 5 to adjust wheel lock engagement. If a wheel lock is
worn or damaged, replace it immediately. Inspect the hardware for loose-
ness or signs of wear.
Ensure that the locking mechanism operates smoothly. The locking as-
sembly should be tight enough so that the wheel can not rotate or the
lock slip. Check that the locking shoe does not press against the tire
when in the unlocked position. Excessive force should not be required to
either engage or release wheel locks. Oil the wheel lock pivot points with
one or two drops of 30 weight oil. Remove excess oil and dirt.
Check anti-tippers (optional)
Check the anti-tippers at least once a week. Ensure that the anti-tippers
are securely fastened and properly positioned.
WARNING: When in use, anti-tippers must be installed in the
downward position.
Check handgrips
Check handgrips at least once a week. Ensure that they are not ripped;
ensure that they are tight and securely fastened.