Philips BDL1005X 55" Class Full HD IPS LED Video Wall Display (2x2 Videowall Bundle) - Manual (Page 17)

55BDL1005X
7
2.2. Input/Output Terminals
1
2
26
22
21
3
20 15
11 12 13 16 17 19 14 9
10
4 5 6
8 18
7
23
24
25
1
AC IN
AC power input from the wall outlet.
2
MAIN POWER SWITCH
Switch the main power on/off.
3
AC OUT
AC power supply to the AC IN jack of a media player.
4 IR IN / 5 IR OUT
IR signal input / output for the loop-through function.
NOTES :
• This display’s remote control sensor will stop working if the jack
[ IR IN ] is connected.
• To remotely control your A/V device via this display, refer to page
17 for IR Pass Through connection.
6
RS232C IN /
7
RS232C OUT
RS232C network input / output for the loop-through function.
8
RJ-45
LAN control function for the use of remote control signal from
control center.
9
RJ-45
LAN control function for the use of remote control signal from
control center.
10
HDMI1 IN /
11
HDMI2 IN
HDMI video/audio input.
12
DVI IN
DVI-D video input.
13
DVI OUT / VGA OUT
DVI or VGA video output.
14
DisplayPort IN (HDCP 1.3 Support)
15
DisplayPort
OUT
DisplayPort video input / output.
16
VGA IN (D-Sub)
VGA video input.
17
COMPONENT IN (BNC)
Component YPbPr video source input.
18
Y/CVBS
Video source input.
19
PC LINE IN
Audio input for VGA source (3.5mm stereo phone).
20
SPEAKER SWITCH
Internal speaker on/off switch.
21
AUDIO IN
Audio input from external AV device (RCA).
22
AUDIO OUT
Audio output to external AV device.
23
USB PORT
Connect your USB storage device.
24 SPEAKERS OUT
Audio output to external speakers.
25 OPS SLOT
Slot for installing the optional OPS module.
NOTES: We recommend to use Advantech ARK DS262 or Winmate
OMIS-OPS modules. We’ll not guarantee other OPS modules.
26 SECURITY LOCK
Used for security and theft prevention.