Philips BDL1005X 55" Class Full HD IPS LED Video Wall Display (2x2 Videowall Bundle) - Manual (Page 11)

55BDL1005X
1
1. Unpacking and Installation
1.1. Unpacking
• This product is packed in a carton, together with the standard accessories.
• Any other optional accessories will be packed separately.
• Due to the size and weight of this display it is recommended for two people to move it.
• After opening the carton, ensure that the contents are complete and in good condition.
1.2. Package Contents
Please verify that you received the following items with your package content:
• LCD display
• Remote control with AAA batteries
• Power cord
• DVI cable
• RS232 cable
• RS232 Daisy chain cable
• IR sensor cable
• IR Daisy chain cable
• Quick start guide
• Edge Alignment Kit-1: 1PC
• Edge Alignment Kit-2: 2PCS
• Thumb Screw: 8PCS
* The supplied power cord varies depending on destination.
Power Cord
Quick start guide Remote Control
and AAA Batteries
RS232 Cable
RS232 Daisy Chain Cable Edge Alignment Kit-1
Edge Alignment Kit-2
Thumb Screw IR Sensor Cable IR Daisy Chain Cable
DVI Cable
* Differences according to regions
Display design and accessories may differ from those illustrated above.
NOTES:
• For all other regions, apply a power cord that conforms to the AC voltage of the power socket and has been approved by and complies with the
safety regulations of the particular country.
• You might like to save the package box and packing material for shipping the display.
1.3. Installation Notes
• Due to the high power consumption, always use the plug exclusively designed for this product. If an extended line is required, please consult your
service agent.
• The product should be installed on a flat surface to avoid tipping. The distance between the back of the product and the wall should be maintained
for proper ventilation. Avoid installing the product in the kitchen, bathroom or any other places with high humidity so as not to shorten the service life
of the electronic components.
• The product can normally operate only under 3000m in altitude. In installations at altitudes above 3000m, some abnormalities may be experienced.