Kodak PIXPRO SP360 4K Action Camera Dual Pro Pack - Manual (Page 57)

56
2. Press the lock downward until it locks tightly. Install the waterproof housing on
the other accessories, and use the set screw to tighten.
Waterproof Housing: For use with other accessories underwater, in rain, on the seashore, or in other circumstances where waterproofing is
required
Installation method:
1.
Remove the camera's lens cover, place the camera and anti-fog inserts
into the waterproof housing.
Before using the camera in a wet environment, please be sure to put it inside the waterproof housing first. Also, it should not be submerged to a depth greater than 60
m (196 feet) underwater.
Anti-fog inserts absorb moisture. Please make sure it is dry before use (heat it in a 150°C oven for around 5 minutes). Each anti-fog insert can be reused up to 4
times.
Before opening the waterproof box, the switch on the lock catch needs to be opened according to the arrow direction firstly.
Anti-Fog Inserts
Lock