Amazfit Band 5 Health & Fitness Tracker with Alexa (Olive) - Manual (Page 21)

21
screen brightness.
If night mode is enabled in the bound app, the night mode brightness is automatically
applied during night mode's effective period. If you manually change the brightness
during night mode's effective period, the change remains effective only during the
current night mode period, and the default brightness is automatically restored upon
start of the next night mode period.
 Lock screen: You can swipe up to unlock the band screen when this function is
enabled.
 Reboot: reboots the band.
 Factory reset: resets all data after confirmation. After a factory reset, the band MAC
address changes, and you need to rebind it.
 Regulatory: displays band certification information.
 About: provides the firmware version and Bluetooth MAC of the band.
Band status alerts
Custom vibration
Band status alerts include incoming call alerts, idle alerts, goal notifications, phone
alarm alerts, event reminders, email alerts, SMS alerts, and app alerts.
Go to Profile > Device > Vibration Mode in the bound app, select an alert category,
and set the custom vibration mode. On the vibration mode list, tap Edit or Add to
delete or add a custom vibration mode. When an alert is triggered on the band, the
band vibrates in the selected custom vibration mode.
Note: You can set a maximum of 50 custom vibration modes.
Incoming call alerts
The band vibrates when receiving an incoming call notification. Tap Hang Up on the
alert page to hang up the call, or tap Ignore or press the band button to ignore the call
and stop the vibration. Before using this function, you need to enable incoming call
alerts in the bound app.
Idle alerts
The band vibrates when it detects that you have been sitting for a long time. Before
using this function, you need to enable idle alerts in the bound app.