Hardware installation (continued) – Raise 3D Pro2 Plus Large Format 3D Printer User Manual

Page 9

Pro2-Series

3D Printer

/ Quick Start Guide

Hardware Installation

(continued)

Locate the open end of the filament, and

feed it through the guide tube.

Press the “Utilities” tab on the screen and

set the temperature of the left nozzle for

the filament that you're using.

Press the “Load” button and the printer will

begin to heat. When the target tempera-

ture is reached, press "Load". Complete

the feeding operation according to the

instructions on the screen.

NOTE:

This document's instructions are based on

the properties of Raise3D PLA filament. This is

the standard filament included with your product

and it is advised to use the Raise3D PLA for

testing and initial setup.