Raise 3D Pro2 Plus Large Format 3D Printer - Manual (Page 28)

Pro2-Series 3D Printer
/ Quick Start Guide
01 02
03 04 05 06
07 08 09 10
11 12 13 14
15 16 17 18
19 20 21 22
23 26
13
During printing, you can check the status of your
model including the remaining printing time and
other parameters from the “Home” interface on
the touchscreen.
NOTE: The touch screen will display an image of your
model on-screen during printing. This image will only be
shown when the file is sliced by ideaMaker and the
.data file is saved in USB storage or uploaded to screen.
H.
Dual-Extruder Print - Start First Print (continued)
24 25