Hardware installation (continued) – Raise 3D Pro2 Plus Large Format 3D Printer User Manual

Page 8

Pro2-Series

3D Printer

/ Quick Start Guide

Hardware Installation

(continued)

Re-install the thumb screws, rotating

clockwise, to lock the build plate into

position.

Open the side door of the printer, and

install the filament holders into the

mounting points. Open one of the included

spools of filament, and place it on the

holder.

NOTE:

The direction of filament spool should be

placed to rotate in clockwise if at points B and D,

and should be oriented to rotate counterclock-

wise at mount points A and C.

Mount Points

Slide the build plate onto the Z platform

with the logos facing upwards, and the

handle edge facing the front of the

machine.