Start first print (continued) – Raise 3D Pro2 Plus Large Format 3D Printer User Manual

Page 17

Pro2-Series

3D Printer

/ Quick Start Guide

Start First Print

(continued)

During printing, you can check the status of your

print including printing time remaining and other

parameters from the touchscreen in the “Home”

interface.

NOTE:

The touch screen will display an image of your

model on-screen during printing. This image will only be

shown when the file is sliced by ideaMaker and the

.data file is saved in USB storage or uploaded to screen.

Select the “Print” tab, and choose “USB Storage”.

Select the file and check the printing parameters

and settings. Press “Print” to start printing the

test file.

USB Storage

Insert the USB storage that contains your sliced

model (.gcode and .data files).

Insert this USB drive into the USB slot on the

side of touchscreen.