Yongnuo Speedlite YN968EX-RT for Cameras - Manual (Page 19)

8.Use Reflection Board
For shooting with the reflection board in flash,
pull out the reflection board and the wide panel
out from the light head at the same time and then
push the wide panel back. In such case, if this
product is being used to take photos, it will
produce a highlighted point on the eyes of the
subject and thus make the eyes charming
(catching light). This function can reach optimal
effect when the flash head is up 90°.
6.Use Wide Panel
Pull out the Wide panel, push back the Reflection
board and arrange them as per the figure; in such
case, the flash scopes will extent to 14 mm ,the
flash range will be enlarged and the effect will be
softer and more natural.
If the wall or ceiling is too far, the bounce flash may be too weak to get
enough exposure. The wall or ceiling should be even and white in order
to get efficient reflection, if the reflection surface is not white, color cast
may appear in photo.
7.Reflection Flash
Bounce flash means to take photos by making
flash light head aimed at wall or ceiling and using
the light reflected back from the ceiling or wall to
light the desired object, so that the shade behind
the object can be decreased to get more natural
shooting effect.
Advanced Applications
9.Using the diffuser ( Options )
Fitting the diffuser lets you diffuse the light from
the flash over a wide range , producing a softer
light and reducing shadows .
When fitting the diffuser , the zoom position is
locked , you can change the setting by P.FN04.
-17-