Canon Speedlite EL-100 - Manual (Page 29)

29
Setting Flash Functions from the Camera
Settings Available on the Flash Function Settings Screen
z
Flash firing
To perform flash photography, set to [Enable] . To use the flash’s AF-
assist beam only, set to [Disable] .
z
E-TTL II flash metering
For normal exposures, set it to [Evaluative] . If [Average] is set, the
flash exposure will be averaged for the entire scene metered by the
camera.
z
Slow synchro
You can set the flash sync speed for flash photography in aperture-
priority AE mode or Program AE mode.
z
Flash synchronization speed in Av mode
You can set the flash synchronization speed when shooting in
aperture-priority AE mode.
z
Safety FE
To avoid overexposure from the flash firing during the day or at
close range, the camera can automatically reduce the ISO speed for
suitable exposure when set to ISO Auto.
z
Flash mode
You can select [E-TTL II flash metering] (p.18), [Manual flash]
(p.33), or [MULTI flash (stroboscopic)] (p.35). [Continuous
shooting priority mode] (p.37) is also available on some
cameras.
z
Shutter sync settings (p.31)
You can select the flash firing timing/method from [First-curtain
synchronization] , [Second-curtain synchronization] , or [High-
speed synchronization] .
z
Flash exposure compensation (p.38)
With a similar procedure as exposure compensation, you can adjust
the flash output.