Canon Speedlite EL-100 - Manual (Page 16)

16
Turning on the Power
(1) (3) (2)
1
Set the Mode dial to <
a
> (1) or
<
K
> (2).
2
Check that the flash is ready.
z
The flash-ready lamp (3) is red when
the flash is fully charged.
z
Shooting is also possible while the
flash-ready lamp is blinking (using
Quick flash). Flash output will be 1/2
to 1/6 of full output.
Mode Dial
z
<
K
>
The flash fires constantly as you shoot.
z
<
a
>
The flash fires automatically as needed (depending on shooting
modes and conditions) when used with cameras that support auto
flash firing.
In [
A
] or [
d
] mode on the EOS R, the flash also turns on or off in
response to these operations with the camera power switch.
z
<
J
>
Turns the flash off.
z
<
[
.
4
/
5
/
6
>
Set when using the flash as a receiver in optical wireless
flash photography. For details, see Chapter 4, “Wireless Flash
Photography: Optical Transmission.”